Wapiti Talk | Elk Hunting Forum | Elk Hunting Tips
 

Thick brush and a visual - scenario question

Moderators: Swede, Tigger, Lefty, Indian Summer, WapitiTalk1

Thick brush and a visual - scenario question

Postby mjblowers » 09 03, 2014 •  [Post 1]

My scenario over the weekend. Glassed from afar a spike and cow. 2 hours later we are within about 100-150 yards with a visual. There is some very very very almost impassable oakbrush separating us from the visable cow and potential spike somewhere that's unseen. We want either.

Going around is going to be noisy as well, maybe not quite as much, but there is no way to get closer without making any noise. Cow calls aren't bringing it in any closer. Bugles were tried as well. These two are just feeding on stuff soaking up the leaves. It's 2pmish and we are calling from a group of pine below on a 35% grade slope.

What would you do to get within shooting distance? How confident you would at least be able to get within 30-40 yards? What would you have done?
mjblowers
Rank: Spike
 
Posts: 106
Joined: 08 08, 2013
First Name: Mike
Last Name: B

Re: Thick brush and a visual - scenario question

Postby Lefty » 09 03, 2014 •  [Post 2]

I use to rifle hunt tight messy stuff,if winds are consistent wind can be your friend, slow and deliberate. nothing wrong with the last 50 yards taking an hour to cover
User avatar
Lefty
Wapiti Hunting - Strategy and Tactics
 
Posts: 7646
Joined: 06 25, 2012
Location: Pocatello Idaho
First Name: Dennis
Last Name: H

Re: Thick brush and a visual - scenario question

Postby otcWill » 09 04, 2014 •  [Post 3]

I'd agree with Lefty. Take your time and go right at em if the wind is good. Also, this aint deer hunting and elk are VERY tolerant of noise as they make a ton of it. If you crack some brush just make a chirp or mew and keep going. Good luck this season!
otcWill
Rank: Herd Bull
 
Posts: 498
Joined: 06 23, 2012
Location: Colorado

Re: Thick brush and a visual - scenario question

Postby elkmtngear » 09 04, 2014 •  [Post 4]

otcWill wrote:I'd agree with Lefty. Take your time and go right at em if the wind is good. Also, this aint deer hunting and elk are VERY tolerant of noise as they make a ton of it. If you crack some brush just make a chirp or mew and keep going. Good luck this season!


Yep..I agree with Will..just "become an elk", and walk in on them. Works especially well when visibility is limited like that.
Best of Luck,
Jeff (Elknut Forums Sponsor)
http://elkmtngear.com/blog/elk-mountain/introducing-the-worlds-most-versatile-blind
the Elk Mountain SLIP System...SLIP it on, SLIP in, and get the SHOT!
User avatar
elkmtngear
Site Sponsor
 
Posts: 959
Joined: 06 11, 2012
Location: State of Jefferson

Re: Thick brush and a visual - scenario question

Postby zpd307 » 09 04, 2014 •  [Post 5]

otcWill wrote:I'd agree with Lefty. Take your time and go right at em if the wind is good. Also, this aint deer hunting and elk are VERY tolerant of noise as they make a ton of it. If you crack some brush just make a chirp or mew and keep going. Good luck this season!

I have to remember to use that mentality. I had a bull let me get within 20 yards in some thick stuff. he trotted off when I broke a stick climbing over a dead fall. I heard his antlers hitting trees as he went. I thought for sure he would have never came back. I wish I would have cow called with an arrow nocked....
User avatar
zpd307
Rank: An Elk Nut
 
Posts: 969
Joined: 02 16, 2014
Location: zumbrota, mn
First Name: gary
Last Name: s

Re: Thick brush and a visual - scenario question

Postby easeup » 09 04, 2014 •  [Post 6]

otcWill wrote:I'd agree with Lefty. Take your time and go right at em if the wind is good. Also, this aint deer hunting and elk are VERY tolerant of noise as they make a ton of it. If you crack some brush just make a chirp or mew and keep going. Good luck this season!


yes....what they said.
User avatar
easeup
Rank: An Elk Nut
 
Posts: 980
Joined: 06 15, 2012
Location: TEXAS

Re: Thick brush and a visual - scenario question

Postby Elkduds » 09 04, 2014 •  [Post 7]

Yep. Also bend down and look around below the oakbrush leaves, you can see much farther. Crawling can be a good way to move through dense oak.
User avatar
Elkduds
Rank: An Elk Nut
 
Posts: 1536
Joined: 09 29, 2013
Location: Colorado Springs
First Name: Mark
Last Name: Scott